Find the most up-to-date version of JASO M at Engineering JASO M Metal pipes for automobile tubing w. WALL A. 2. Classification. Type of pipe. The pipes shall be classified into the following 4 groups. 1. Jaso M Bhg2 *mm Zn Coated Double Wall Steel Tube Bundy Tube For Brake Pipe Line Of Automobile, Find Complete Details about Jaso M
|Published (Last):||15 September 2018|
|PDF File Size:||1.30 Mb|
|ePub File Size:||15.25 Mb|
|Price:||Free* [*Free Regsitration Required]|
JASO M Brake Tube ASTM A, AA, Application:Universal
The welded low carbon steel pipes shall be made by copper coating both surfaces or inner surface of SPCC specified in JIS Gshaping them into a tubular form, and sealing the edges by electric resistance welding, however inside surface, may not be copper coated if mutually agreed upon by the purchaser and the manufacturer.
Designation of products shall be pursuant to the standard number, type of tubing, and type and nominal diameter of outside surface. The pipes shall be tested pursuant to Table 10 and shall resist the guarantee pressure specified in Table 8 without leaving injurious deformation.
Wall of the tubing shall be free from flaws or cracks after the tests pursuant to Table 10 are conducted. Method of manufacturing 4. Performance of organic film shall be pursuant to Table 6 and shall meet requirements in Table 7, after the tests pursuant to Table 10 are conducted as occasion demands.
Copper and copper alloy seamless pipes and tubes C or C Tubing mainly for air brakes 2. The applicable standards for this standards are shown below.
The test shall be conducted pursuant to corrosion test specified in Table 10 and shall meet requirements in Table 6. When the plates are pressed, the weld of tube shall be placed at 90 degrees to the direction of applied force.
Japan standard JASO M101 SPCD 6.0*1.0mm cold drawn seamless tube high pressure oil pipe
Example if any flaws, cracks, or other defects occurred or not when the pipe was bent degrees around a cylinder having the radius as specified below. Inspection shall be jaeo pursuant to the above 6 and the results shall meet requirements specified in the above 4.
Examine if any leak of other defects occurred or not when pipe is applied with specified hydraulic pressure and held for 5 minutes.
The brazed double wall low carbon steel pipes shall be made m10 copper-coating both surfaces of SPCC specified in JIS G, shaping them into the form of double wall tubing, and sealing the seams by copper brazing and fusion in a reduction furnace. Inspection shall be conducted by the above 6 and the results shall meet requirements specified in the above 3.
JASO M101 Metal Pipes for Automobile Tubing
Iron rust red rust shall appear 5 spots or less per 50 cm 2 in 24 hours. Standards automobile tubingJASOmetal pipestube standard.
Pursuant to JIS H Guarantee pressure test Examine if any leak of other defects occurred or not when pipe is applied with specified hydraulic pressure and held for 5 minutes. Flattening Test 1 Length of test specimen shall jaeo mm.